A server in ColoTycoon earns nothing until it has a working path to the internet. Each cabinet gets an uplink from the facility, and you build the rest yourself from switches, optional firewalls and cables. The network decides whether a server counts as online, how fast its link is, and what happens when a carrier fails or an attack arrives.
The cabling tree
Every cabinet is a tree with the uplink at the top. The rules are strict and the cable picker only lists valid targets:
- Servers and blade enclosures plug into a switch, never straight into the uplink.
- Switches plug into the uplink or into a firewall.
- Firewalls sit only on the uplink.
- Both ends of a cable must be in the same cabinet.
A lease starts with one uplink port. To get a cabinet online:
- Rack a switch.
- Cable the switch to the uplink.
- Cable each server to a free switch port.
- Optionally put a firewall on the uplink and hang the switch off the firewall instead.
A server with no path to the uplink is not online. It is not counted in stock, it earns no revenue, and once it has been online it is logged as down for network reasons.
Switches
| Switch | Ports | Port speed | Uplink speed | Price |
|---|---|---|---|---|
| 8-Port Switch | 8 | 1 GbE | 1 GbE | $60 |
| 24-Port Managed Switch | 24 | 1 GbE | 10 GbE | $650 |
| 48-Port 10GbE Switch | 48 | 10 GbE | 100 GbE | $9,000 |
| 24-Port 25GbE Switch | 24 | 25 GbE | 100 GbE | $11,000 |
Port count limits how many devices hang below a switch. Port speed and uplink speed both cap the servers behind it.
Firewalls
| Firewall | Throughput | LAN ports | IPS | Price |
|---|---|---|---|---|
| Small Office Firewall | 1 Gbps | 4x 1 GbE | no | $600 |
| Branch Firewall | 5 Gbps | 8x 1 GbE | yes | $2,500 |
| Edge Firewall 10G | 20 Gbps | 8x 10 GbE | yes | $9,000 |
| Datacenter Firewall 100G | 120 Gbps | 16x 25 GbE | yes | $45,000 |
A firewall's LAN ports limit how many switches it can feed. Its main job in the game is attack filtering, described below.
Link speed
A server's effective speed is the slowest hop between it and the uplink: its fastest network card (on board or in a PCIe slot), the port speed of every device above it, the uplink speed of the switch, and the cabinet's hand-off. A 100 GbE card behind a 1 GbE switch runs at 1 GbE.
The network panel labels each link as copper or fiber. A link counts as fiber when both ends run at 10 GbE or faster. Network cards run from 1 GbE to 100 GbE in RJ45, SFP+, SFP28 and QSFP28 forms.
Uplink hand-off
The hand-off is the physical port the facility gives your cabinet. Its speed is the most traffic the cabinet can carry.
| Hand-off | Speed | Monthly fee |
|---|---|---|
| Copper (RJ45) | 1 GbE | included |
| Fiber (SFP+) | 10 GbE | $300 |
| Fiber (SFP28) | 25 GbE | $500 |
| Fiber (QSFP28) | 100 GbE | $1,200 |
The fee is added to the hourly rent: a billing month passes every 24 real hours, so each real hour carries one 24th of the monthly fee. Each unit of a lease also includes 100 Mbps of committed bandwidth. Customer and visitor traffic beyond the included total across your leases is billed at $0.50 per Mbps per billing month, in hourly shares.
Redundant uplinks
A second carrier costs 50% more rent on that lease. Carrier cuts happen at a rate of roughly once per 40 days per lease and last 1 to 3 hours. Without a second carrier, every server in the cabinet goes offline for that time. With one, the second carrier takes the traffic and nothing goes down. The second carrier also adds one uplink port, so you can run two switches or a firewall and a switch directly off the uplink.
Traffic
The traffic panel draws one sample per cabinet per hour. Demand comes from the customers in the cabinet:
- A VPS customer averages 12 Mbps.
- A hosting account averages 1 Mbps.
- A dedicated tenant averages 60 Mbps.
- Website visits from your marketing add 2 MB each, shared across the cabinets that have customers.
Demand follows a daily curve: it peaks in the afternoon and drops to about 30% of the peak in the early morning (UTC), with a small random wobble each hour. A quiet cabinet at night is normal.
Saturation
When customer demand exceeds the hand-off speed, the uplink is saturated. You get a warning, service slows, and customers in that cabinet leave four times as fast as usual until demand falls back under capacity. The fixes are a faster fiber hand-off or spreading customers across more cabinets. Once demand fits again, the warning clears the next time you open the Racks page, and the traffic panel counts the new port speed at once; the chart keeps its older hourly samples. Churn is covered in selling hosting.
DDoS attacks
A cabinet with paying customers can be hit by a DDoS attack, roughly once per 28 days per lease, lasting 1 to 3 hours. Attackers pick targets their size, so the attacks grow with your company's era:
| Era | Attack size |
|---|---|
| Tenant | 0.3 to 3 Gbps |
| Established | 1 to 10 Gbps |
| Site owner | 5 to 40 Gbps |
| Regional network | 20 to 120 Gbps |
The top of each range is bigger than the firewall that is typical for that stage, and no attack is larger than the 120 Gbps Datacenter Firewall. What happens depends on your protection:
- A firewall on the uplink with intrusion prevention (IPS) and at least the attack's throughput filters the flood, and customers are not affected.
- Without such a firewall, a rented DDoS filter stops attacks up to its size. Pick it next to the lock above the cabinet: 1 Gbps for $40 a month, 5 Gbps for $150 or 10 Gbps for $400 per cabinet. Over a year or two a firewall with intrusion prevention of the same size costs less.
- Otherwise the uplink is saturated and every server in the cabinet is offline for the duration, even with a second carrier.
An unfiltered attack also makes some customers leave on the spot. The surviving incidents guide covers the response.
IP addresses
A new cabinet includes 24 IPv4 addresses (a /28 and a /29). Each VPS and each dedicated customer uses one address. Hosting accounts share their server's address. When a cabinet runs out, VPS and dedicated plans stop selling there and the sales page shows the stock you are missing because of it.
The facility does not sell more addresses. When a cabinet needs more, you lease or buy a block on the IP market and route it to the datacenter; every cabinet you have in that datacenter shares it. IPv6 is free: every VPS gets its own IPv6 address alongside its IPv4.
Established companies can also buy whole IPv4 blocks from the regional registry, route them to their own cabinets with no monthly fee, and sell or lease them to other players. That is covered in IP space.