Screens
Maintenance
The Maintenance page shows the health of every device and part, the parts that need attention, your planned maintenance windows and your spares.
Every part in ColoTycoon wears out. Disks first, then power supplies, memory, network cards and processors. Busy servers and hot cabinets wear them faster. The Maintenance page is where you see that coming and act before a part takes a server down.
Upcoming windows
At the top, the maintenance windows you have planned or that are in progress, with Cancel for those that have not started, and the recent windows below them.
Needs attention
Under the windows, a plain card lists every part that has failed or dropped below 40% health, with roughly how long it has left. Each one says whether it is Hot-swap (can be changed while the server runs) or Needs shutdown, and Replace takes you to it.
Worn parts fail more and more often as they age. Replacing them early costs a part; waiting costs customers.
Devices
Every device you own, one card each:
- Its state: Online, Offline, On the bench, In maintenance, Scheduled maintenance or Forced off (downtime).
- Where it is, its operating system, and its uptime over 24 hours and 30 days.
- A table of its parts: Slot, Health, Hours used out of its expected life, Wear-out in (time until it wears out) and Swap (hot or cold).
- Start maintenance to shut it down for work, and Open in Nodes to change parts.
Schedule maintenance
Some parts can only be changed with the server switched off. To do that without upsetting customers, announce a maintenance window at least a day ahead:
- Pick the Server.
- Pick when it Starts and how long it lasts (Duration).
- Add a note if you like and click Schedule window.
During the window the server is off, customers are not penalised and the time does not count as downtime. Upcoming windows lists what is planned; you can cancel one before it starts. See Maintenance windows.
Inventory
On the right: your spare parts and machines not in use. Failed parts stay here until you recycle them on the Inventory page. Spares here are what your technicians reach for.
Tip: A disk that fails inside a RAID that can survive it leaves the server running as "degraded". Replace it quickly, before a second one goes.
Common mistakes
- Trying to change a cold-swap part on a running server: it is refused until the server is powered down.
- Forcing a shutdown instead of planning a window: it counts as downtime and costs reputation.
- No spares in stock: technicians cannot replace anything.
Want the numbers? The full rules: Building servers